I wish I knew then what I know now – Part 1

 

Fly fishing: it’s one of the most exciting and addictive endeavors I have ever taken part in.  It requires a unique combination of the skills used in hunting and those found in traditional spinner fishing.  It’s challenging and, because of that, it is wildly rewarding, and invariably takes place in some of the most beautiful locales in the world.

The trouble is it can be terribly difficult or intimidating to get started.  The learning curve is steep, requiring a new set of casting skills, a knowledge of insect and other “fish feeding” behavior, the ability to tie a number of different knots proficiently and gear and gizmos that are both expensive and overwhelming. On top of that you need to really know and understand the water you intend to fish and some of the best spots are secrets held tighter than many national security issues.  Oh, and last, right or wrong, it’s a bit of a fraternity  – a special club of insiders that seems difficult to breach.

Below I will cover some things I’ve learned since I’ve gotten into fly angling that I hope will help take some of the mystery out of the sport and accelerate your learning curve.  The advice below is based on angling for trout in rivers or streams but can be modified in various ways for other species and bodies of water.

 

First, don’t go it alone.

Okay, this one seems obvious but finding a friend that is a fly angler and willing to take you under their wing is by far the fastest and most effective way to accelerate your learning curve.  And guess what?  Most of these anglers love their sport and would love to bring someone new into the fold.  Surprised?  Don’t be.  The secret fraternity is not nearly as un-breachable as it seems.  It’s made up of people that, at one point or another, were in your exact same shoes – or breathable waders (more on that later).

If there isn’t a friend or family member that you can latch on to, the next best bet is to hire a guide for a day.  I guarantee you will learn more in that one day with a guide than you will in months of reading and frustration trying to figure things out on your own – trust me.  These guys put people on fish for a living and most of them love to teach.  It will be the best investment you can ever make in your fly fishing journey.

 

Next, let’s talk flies.

If you are just getting started and anything like me, one of the most confusing riddles to decipher out of the gate was flies – the generic term used to describe all things meant to entice fish on the end of your fly line.  So let’s break down some fly basics.

There are essentially 3 types of flies: Dry Flies, Wet Flies/Nymphs and Streamers

 

Dry flies – those that float on top of the water and attract rising fish.  These are the flies most everyone thinks of when they think fly fishing and they are certainly some of the most exciting to fish.  There’s a lot to understand here, but the basic is this – fish feed on flies on top of the water.

Of the flies that hatch there are three basic categories: Mayflies, Stoneflies and Caddis – the easiest way to distinguish them from one another is by their wings. Of course within each category there are a number of specific species that range in size and color.  My advice to get started is to narrow down the basic category of fly (Mayfly, Stonefly or Caddis) that is hatching (watch the top of the water and the air around you) and then come as close as you can in size and color.

Beyond hatching flies in the dry fly category are “terrestrials” – bugs or other critters that come from the land and basically fall into the water and become trout food: grasshoppers, ants, spiders, beetles, even mice (more on this later).  These dry flies are typically found later in the summer once the majority of the hatches are done.

The cast.  Of the three types of flies, casting dry flies is arguably the most challenging.  The margin for error is pretty small because fish are pretty smart (part of the fun, remember?).  When casting a dry fly you essentially want to float your fly over the head of a rising fish, without spooking it, using floating line with leader and tippet.  So the first step, of course, is to find rising fish.  Once you have located a fish or two rising, you can watch the water to decipher the feeding lane – typically a bubble line.  You will want to make your cast upstream of the feeding fish into the feeding lane, mend your line (more on this later) and allow your fly to drift, drag-free, over the feeding area. When you see or feel the strike, raise your rod tip to set the hook. Simple, right?  In theory it is.  Mostly it just takes practice and mistakes and time on the water and more practice.

To get started here are three basic dry flies I would add to my box:

  • Caddis in a few different sizes and colors
  • #12 Adams Parachute – it imitates a number of different Mayflies well enough to fool most fish
  • Foam grasshopper – this will be a great fly to have in your arsenal later in the year when the hatches are done.

Shop Fly Fishing Flies

Beyond that – the best bet is always checking with Jay’s to see what is hatching and what they recommend.

 

Wet Flies/Nymphs – these flies represent insects in the nymph stage of their life cycle that live under the water. It is estimated that nearly 80% of a trout’s diet consists of feeding under the water, so wet fly fishing can be extremely productive.

Just like with dry flies, wet flies/nymphs exist for each of the three categories of insects:  Mayflies, Stoneflies and Caddis.  Most of these will be present in the river at any given time in some form or another.  If you want to get a little more sophisticated, grab a stone or two out of the river and look at the bottom of it, often times you will see various insects in the nymph stage attached and you can use this to match what you want to throw.

The cast.  Good news here, casting and presenting a wet fly is one of the easiest methods of fly fishing – is requires much less, in terms of presentation, than a dry fly.  You will be fishing your fly under the water near the bottom and flowing with the current.

Fishing a wet fly can be done using floating line, leader and tippet and can be rigged either with or without an indicator (yeah, it’s a fancy word for bobber).  There are pros and cons to both methods.  An indicator allows you to maintain a relatively consistent depth with your fly and it can alert you to small strikes that you might miss if going only by feel.  On the other hand, it’s one more thing attached to your line – which can complicate casting and it does require some mending.  My preferred method for fishing trout with a wet fly is to go by feel.  Again you will be looking for the feeding channel that will be holding fish.  If you watch carefully you can literally watch fish park in this channel and binge on passing nymphs. Rainbow trout are especially easy to spot with their white mouths.  Once you find the feeding channel you will work upstream of the fish, cast across the feeding channel/bubble line and allow your fly to “swing” downstream and through the channel until it eventually comes to a dangle.  The idea is to work the fly through the feeding channel and in front of the fish.  Your fly should look like a nymph that is free-floating down the river.  Be ready for a strike at any point through the swing and keep your rod tip following and pointed at your fly through the process. When you feel the strike, lift the rod tip to set the hook.  And keep in mind, a good majority of strikes happen on the dangle, so let your fly sit there for a few beats before you re-cast.

To get started here are three basic wet flies I would add to my box:

  • Bead Head Prince Nymph in various sizes
  • Copper John in various sizes
  • Caddis Nymph in various sizes

Shop Fly Fishing Flies

Again, it always makes sense to check with the Jay’s to see what wet flies they are recommending.

 

Streamers.  Ah yes, throwing big protein to attract big fish. Streamers are meant to imitate baitfish or other larger underwater food sources such as leeches and sculpins.   Streamer fishing can be extremely exciting and very productive.  This method of fishing most closely resembles spinner fishing using a Mepps Spinner or Crank bait such as a Rapala but rather than reeling to retrieve your line, you are stripping the fly back to you in a method that gives the streamer movement and action in the water – often times enticing aggressive and explosive strikes from large fish.

As with dry flies and nymphs, streamers come in a variety of sizes and colors meant to imitate different food sources.  Most have some type of weighted head meant to get the streamer down to the fish.  Streamers can be fished with floating line or sinking line – it largely depends on the depth and speed of the water you want to fish (more on this later).  Shortening up your leader (I recommend 3-6’) makes casting these heavier flies much easier and more controllable.  In many cases I will simply tie my own leaders from 8# or 12# fluorocarbon.

The cast.  Once learned, throwing streamers can become quite easy – especially if you keep your leader short and make sure you are using a rod with enough backbone for the streamer you have selected IE bigger/heavier streamers require bigger/heavier rods to throw effectively (more on this later).  If you have room, you can use a typical false cast approach to get your streamer where you want it, but I find that a roll cast can be much less frustrating.  The good news with streamers is that the cast doesn’t have to be pretty, it just has to get the fly where you want it.  Casting presentation is not the key here, the retrieve is.  There are a number of theories regarding streamer placement and retrieve – the biggest thing to keep in mind is that you want your streamer to look like a live fish going through the water and you have to move it in a way that will entice a strike.  My preferred method is to cast up stream of the targeted area and as close to the bank as possible – and then retrieve back to me downstream through the current.  I have found the most success with this method and I believe that is because as fish are feeding facing upstream. Pulling a streamer downstream and past them provides (in my opinion) the most realistic look, it also ensures that when I strip-set the fish I am pulling my streamer into the mouth of my fish versus out of it.  I recommend starting with smaller (easier to cast) streamers at first and varying your retrieve/strip speed until you find some success – many professionals believe that fast and aggressive is the best method, drawing out predatorial strikes from fish.  My good friend, Matt Workman, owner of Wiked Flies, recommends stripping (your line) to the tune of the Beatles’ Yellow Submarine – the key is finding what works for you and on your water.  Mix it up.  Experiment.  And be ready for hard, aggressive hits.

To get started here are three streamers I would add to my box:

  • Any version of a Wooly Bugger
  • Slumpbuster
  • Muddler Minnow

Shop Fly Fishing Flies

 

Again, it always makes sense to check with Jay’s to see what streamers they are recommending.

We’ll be talking more about gear options – what you need and what you don’t, the basic knots, some casting tips and other things that should help you get up to speed faster in future posts.

Shop Fly Fishing

 

Allen Crater Ambassador

Allen is a 44-year-old husband and father of two teen-aged sons that love the outdoors and one insane German Short-haired Pointer named Lucy that loves pointing, flushing and retrieving anything, all the time.

He is the President and part owner of an advertising agency located in Michigan.

Reading books about everything, especially travel, adventure, war, history, and outdoor pursuits, is another passion of Allen’s. He loves great food, great beer and great wine, sometimes in moderation, sometimes not.

More than anything though Allen loves the outdoors. He loves the smells, the sounds, the sights.  Since He was a little boy fishing with his dad, pitching a tent in the backyard, and unwrapping pocketknives for Christmas he’s been drawn to all things outdoors.

In the summer you can usually find Allen cooling his feet by the lake, in search of elusive trout on the river or losing himself on a trail someplace. In the fall the weather becomes more bearable and the hiking and camping really pick up. Fishing still occupies much thought and time, but hunting and being in the “Big Woods” with friends and family becomes the focus. Winter brings a shift and you can typically find him walking trails with the dog, snowshoeing with his wife or skiing with his family. When not outside you’ll often find him parked in his favorite chair next to the fireplace with a good book and a snifter of Scotch or a thick Stout.

Leave a Reply